MMU3 Enclosure Addon - Adapter for injection moulded spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use the Original injection moulded Spoolholder from the MK4S on the Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
If you want to upgrade your 3D-Printer setup and use the Prusa MMU3 together with the Prusa enclosure the original injection moulded spoolholder from the MK4/S (or older) can't be used, because it doesn't fit into the enclosure (and the MMU needs its attachment place). So these parts are obsolete. Prusa suggests to print the new spoolholders to mount outside to the enclosure.
With this model you can reuse the injection moulded spoolholder from the original Printer and therfore save material and print-time.
If you wish to use 2kg spools, you can print the spool-extender and attach it between the "MMU-Enclosure-Spoolholder" and the original injection-moulded spoolholder-shaft.