XLpower Stratos 200 Toolless battery Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows swapping between 3s and 4s batteries
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
XLPower Stratos 200 — Toolless 3S to 4S LiPo Battery Spacer
Tired of pulling out the hex driver every time you want to switch between 3S and 4S packs on your Stratos 200?
With this spacer, you only need to adjust and lock your Stratos battery holder once for your largest 4S pack. When you want to fly a smaller 3S pack, simply slide this lightweight spacer in to perfectly take up the gap and lock the battery tight. Swap packs in seconds at the field without picking up a single tool!
Battery Compatibility
The included spacer Stl file works perfectly with the following Batteries:
OMPHobby 3S 750mAh
ManiaX 3S 750mAh
Tattu R-Line 4S 650mAh
Custom Spacers (.STEP Included)
Because battery dimensions can vary slightly between brands, I have included the original .step file. If you use a different pack or need to tweak the thickness for a perfect snug fit, you can easily modify the geometry in CAD to suit your specific battery packs.
Recommended Print Settings:
Because this part interacts directly with your flight packs and needs to absorb vibration/clamping force, a flexible filament is required.
Filament: Sainsmart 95A TPU
Infill: 10%
Walls/Perimeters: 2 or 3 walls
Supports: None needed!