Mega Keyer complete enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of W6IPA's Mega Keyer enclosure design so that there is now a printed bottom, top and sides.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of W6IPA's Mega Keyer enclosure design so that there is now a printed bottom, top and sides. I also added the "engraving" for the port names.
There is a video on YouTube of the keyer in action https://youtu.be/KYbplGL4TiI
Encoder knob from here https://www.thingiverse.com/thing:3904056
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .15mm
Infill: 20%
Filament: Prusa PLA Yellow/Grey
Notes:
Nothing particularly critical in the above settings, although set it up so that the engraved sides are face down on the plate.
I used the Prusa textured steel plate to give it a nice finish which meant that adhesion wasn't so great and edges had a tendency to curl. To fix this, I used a 5mm brim around the builds.
Note that the yellow photo was of an earlier version - I just like the colour better than the grey one!