Arrma Gorgon - Dual Sided LED Under Glow Lightbar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chassis mounted light bars for mounting LED strips to illuminate the ground below and the body shell itself.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Personalize your Arrma Gorgon and illuminate the night with these chassis side mounted LED strip mounts for adding 5mm LED strips to your Arrma Gorgon.
These will illuminated the area below the chassis, and also project light into the body shell, making your Gorgon GLOW for the ultimate night time bashing!
The LED rails attach to the existing mounts on the side of the chassis with M3x10mm screws.
After choosing the preferred color of your 6V, 5mm LED strip. Matching the LED strip to the color highlights of your Gorgon is usually a safe bet. The LED strip is connected to the mount using zip ties. You will need to solder a bit of wire and a connector onto the LED strip so that it can be plugged into an empty channel on your receiver.
Once everything is installed you will only need to enjoy the summer nights with your new illuminated Arrma Gorgon!