Simple Steam Controller Holder (2026) SC2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a very simplistic Steam Controller (2026) Dock. Please comment if you print it and give feedback. :)
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 144
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I finally received my Steam controller and needed a Dock to present it on my desk :).
No supports necessary!
I printed it in PLA on my Centauri carbon at 0.2mm layer height and 20% gyroid on the bottom part and 5% on the upper part to make it bottomheavy.
After printing insert the puck with the usb c female first and slide the bottom in and plug the cable through the holder. (This is intended to hold the puck in place).
Please give me feedback and/or post pictures of your makes :).
I am still very new to 3d modeling and this is the first model I made in blender.
Printing takes ~2hours depending on infill/wallcount.