SparkX i7 Gridfinity Nozzle Kit bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bin for a set of Creality SparkX i7 nozzles, labelled 0.2/0.4/0.6/0.8
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity nozzle holder bin, for a set of Creality SparkX i7 nozzles.
This is the nozzle shape from the Single Nozzle Holder 1x2 bin (blown to 110% for wider tolerance), boolean'd off a parametric 4x2x4 stackable parametric blank bin (note: created off the FreeCAD workbench linked in the original model), with extra negative space around it for easier gripping.
Nozzle labels use the B612 open font.
Note: even though this is 4u high, it's still NOT stackable with the nozzles in!
My suggestion is to print this with a 0.6 nozzle (which you probably have, if you're looking for this model!), and with the nozzle labels in a different colour.
Included GCODE files (in the zip file) are pre-sliced with Orca 2.3.2 for the SparkX i7 0.6 nozzle profile (with some optimisations and aiming for speed), using the "Generic - for SparkX i7 0.6 nozzle" PLA/PETG filament profiles from Creality. If using the CFS for multiple colours, map at will. If printing straight from the fluidd webui, it will use the filaments in CFS slots A (for the body) and B (for the labels).
I had to zip the pre-sliced GCODE, as printables wasn't too fond of Klipper-style commands.