Magnet Hole Remover for Gridfinity prints -- Save Print Time
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remove the holes for magnets on your Gridfinity prints with this simple modifier for Prusaslicer
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Modify Gridfinity Bins to Remove Magnet Holes
Print with no bridging and save time!
These are some simple models I made to remove the magnet holes on gridfinity prints. Add the model to your print as a part to save material, save time, and print without any bridging.
For a simple 3x2 bin, this modifier shaved the print time by over 15 minutes.
How To Use
Load your gridfinity print into Prusaslicer
Right click on the model and select "Add Part > Load..."
Load the correct sized hole remover. (Make sure the hole remover is aligned with your print)
Slice and watch the estimated time drop.
Alternatively, you can import the gridfinity STL and hole remover separately, and merge the files.