Kukirin Turn Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
This is a self-designed turn signal for the Kukirin G2 Pro scooter. In principle, it works on any scooter that has 12V indicators – or on any scooter where you have 12V and can add a handlebar switch and a suitable flasher relay (or equivalent).
You will need (not printed):
1x M8 x 18mm lamp pipe nipple (lamp stud / threaded nipple) with matching nuts
1x 2,7-3mm COB LED strip, DC12V, orange, approx. 80 LEDs/m (25mm cutable)
Just print the parts, insert the LED strip, mount the nipple, and connect everything to your 12V wiring (don't forget a proper flasher relay!).
Important legal note:
This turn signal has not been tested or certified according to any road traffic regulations. It does not carry any type approval mark (E‑mark, DOT, etc.). It is your own responsibility to check the legal requirements in your country before using this on public roads.