1 / 3
Tube clamp - print-in-place with Securing Hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the base model of a clamp that locks around a tube and that is easy to install.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
On its own this model if of few uses, the idea is to use this model as a base to suit your tube clamping needs. This is made easy by the parametric design. Printing is easy as well since its print-in-place.
M4 Hole, compatible with HeatsetInserts
Ø Is set to 42mm (Can be changed due to Parametric nature of original)
Ø Of securing Hole is 9mm (non-parametric, but changing it only needs an edit of the Sketch in f3d)