1 / 6
Toyota MR2 AW11 fusebox lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lid for the engine bay fusebox in a MR2 mk1 - AW11
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
New lid for the fusebox in the enginebay on a Toyota MR2 mk1 - AW11.
Print two of the clips. I have not made locator pins, as I glued them on with the lid on the fusebox.
My lid is printed in ASA, on an old Ender 3, about 4 years ago. So excuse the poor print quality.
