DS18 3in Tweeter Adapter for Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DS18 3in Bullet Tweeter adapter for speaker box with 2.9in mounting hole with the wing slots.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I made these adapters for the DS18 3in Bullet tweeters, which will probably fit other 3in tweeters as well. It is made for boxes with the wing cutouts so that the gaps are filled. The box cutout is for a 2.95 speaker, but the hole is only 2.9. This adapter is a very snug fit in the box and is meant to line up with the holes on the DS18 tweeters. I printed in PETG due to the tight fit requiring some pressure to install, and this box will be in my truck. Supports are needed for the wing pieces, and I recommend 3 walls. I printed at 0.16 layer height for my project, but it works fine at 0.20 layer.