Hyper-Aero GT Wing for S13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade your Nissan S13 model car with this aggressive, high-downforce drift wing. Custom-scaled to fit perfectly.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Add the ultimate drift finish to your scale model build. This custom rear wing is designed specifically to fit the trunk lines of Nissan S13 models (Silvia, 240SX, and 180SX variants). It is perfect for upgrading plastic model kits, diecast cars, or custom static prints.
Features
Tailored Fit: The mounting bases match the curvature of the S13 trunk lid for clean installation.
Scale Details: Fine-tuned edge thickness to look realistic and sharp at a smaller scale.
Easy Printing: Designed to print flat to ensure smooth surfaces and sharp wing endplates.
Print Settings
Material: PLA, PETG, or Resin (Resin will give the sharpest detail for small scale models)
Layer Height: 0.1mm to 0.12mm (for crisp detail and minimal sanding)
Infill: 100% (Solid) since the part is very small and thin
Supports: Yes (Use light, easy-to-remove supports under the main blade)
Check out my full Nissan S13 3 Turbo 5.3 model to get the perfect matching car for this wing!