direct-drive Carriage/Trolley plate for front-mounted mgn12h rail. (20mmx20mm bolt pattern carriage)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
uses E3 stepper and hotend mounting holes. i used heat-sets for the hot end holes. mine is pla+
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
a printable plate to convert to direct-drive. my printer is a slightly modified e3 pro v1. this plate has run 180-ish hours so far, and still has no discernible flex. mine is only printed from sunlu pla+.
petg is of course preferred, but I be doing what I want. be sure to reduce your retraction to 2-3mm tops, and anticipate some sag without dual-z.
i used m3 heat-sets for the hot end holes, and pushed them in from the back.
the shim is needed on some Chinese mgn12h carriages to keep the extruder stepper from trying to occupy the same space as the uprights. lay it flat and scale up only Z if you need it thicker
i printed the plate both ways, and laying on the face (large side) seems to result in the strongest print. 100% infill, no supports needed. first to download can do me a solid> let me know if the stock belt fits. If not, I will adjust.
added another version for clearance over low-profile rails.