Indoor Trainer front wheel bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front wheel mount for an indoor trainer so you can take your front wheel off and have your fan closer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
I have been using it for 6 months and no issues. There is some play between the two parts so it is a bit compliant. Also it is a big print so id suggest a 0.6mm + nozzle if you have. it does take about 750g of plastic depending on settings, but I suppose you could use print blockers on your slicer to cut down on material if you want.
I've also added a spacer, originally I was going to print this in TPU but ultimately it wasn't necessary, the juice wasn't worth the squeeze. I have included it if you want to print it from PLA to add it as a spacer and have a slightly elevated front end.