DIY Wall Art | Chambre 006
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
49 x 41 x 6 cm 3D-printable wall sculpture by Tokyo-based artist V-XL
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Open Community License v1
=======================================================
PROJECT : DIY art: Chambre 006
FORMAT : STLs
You can find more models at: https://v-xl.art
--------------------------------------------------------
[ DESCRIPTION ]
The "Open Chambre" series is a collection of 3D-printable
sculptures released as free replication art by Tokyo-based artist V-XL (Baptiste Tavernier)
Size: 49 x 41 x 6 cm
Avg. print time: 80H.
Optimized for FDM 3D printing
--------------------------------------------------------
[ PRINT SETTINGS ]
> NOZZLE : 0.4mm (recommended)
> LAYER HEIGHT : 0.2mm
> INFILL : 15%
> MATERIAL : PLA or PETg
> STANDARD COLOR SCHEME: Black frame, White specimen, blue and red color accents (but it is of course up to you)
[ HARDWARE ]
Frame parts and other large parts need M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) to connect to each-other.
Smaller parts can be attached with glue.
--------------------------------------------------------
[ Print Manual ]
This artwork is divided into 24 files.
Print the 9 "Base" files (S.C.S.: black). They do not need supports, but a brim or helper-disks (I prefer helper-disks) can help stabilize the base onto the printer’s plate.
Fasten the Base with M3 x 8mm screws and M3 square nuts.
Print the "Base Inlays" (S.C.S.: red) for bases 1-3 and 7-9, and glue them into the corresponding base.
Print 14 “round light" (S.C.S.: blue and red), and glue them into the base 4 and base 6.
Print the "Central inlays" files (S.C.S.: blue), and glue them into the central frame.
Print 3 “square light" (S.C.S.: blue and red), and glue them into the central frame.
Print 3 “diamond" (S.C.S.: blue or red), and glue it into the central frame.
Print "Statue" 6 times (S.C.S.: black), and glue them into bases 1-3 and 7-9. You shouldn't need supports, unless you have a very old printer. It is supposed to be printed standing, not flat on the bed.
Print "SPECIMEN“ (S.C.S.: white). You can attached it to the frame with one M3 x 8mm screw and one M3 nut.
--------------------------------------------------------
[ SHARE YOUR MAKE ]
Please share your build! I’d love to see your favorite
color combinations.
========================================================
© 2025 V-XL