Bicycle Mudguard Bracket - Fahrrad Schutzblech Halterung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for bicycle mudguard using M5 and M4 screws, printed in PETG. No supports needed!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello there!
After my last bike ride I had to get creative: A stick flew into my mudguard and broke off the plastic bracket holding the mudguard in place.
My creation works just like the original plastic piece (added picture for clarity). It can be printed vertically without any supports, use a brim for better adhesion.
I printed with PETG with 6 Walls to create a solid piece and already rode 150km over bumpy terrain for testing. All original screws should work (M5 with a washer for mounting to bike, M4 with nut for fastening the metal holder). I used a washer to mount to the bike frame for better distribution of force.
Do not over fasten the screws (M5 to bike: <5Nm f; M4 fastening mudguard: <1Nm)!
Let me know if the print worked for you!