Printable KSP Δv map
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable KSP Δv map based of design by swashlebucky
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The design was reconstructed in Onshape by manually tracing the original picture, taken from here. I did try to use "trace bitmap" in inkscape but i couldnt get it importet to Onshape afterwards. If you want to edit the design you can export or edit in Onshape with this link.
I did not include most of the text as it would not have printed properly. I had to add my own text for the names of the planets and make them about 1.5 times the size of the original text for it to be readable enough. I also added a hohmann transfer in the top left so it would not look empty.
The base plate, orbits, plantes and text is all one print and requires color change when the text and orbits start. All the colored lines are printed seperatly and should friction fit into the groves of the base plate. If they dont fit you can edit the "Move face 1" operation in Onshape.
Material: PLA/PETG
Infill: 15%
Layer height: 0.2 mm
Supports: Nope