Revopoint POP protective carrying case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
News : I've been asked to make an evolution of it, a case to stay on while scanning, you can find it on Cults3D…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
News : I've been asked to make an evolution of it, a case to stay on while scanning, you can find it on Cults3D : https://cults3d.com/en/3d-model/gadget/protective-scanning-case-for-the-revopoint-pop-3d-scanner-nebulus
Protective carrying case for the Revopoint POP 3D Scanner
- A small edge at the bottom prevents the screen from touching the plastic and thus avoid scratches
- A notch on both sides to ease the removal, with the bottom notch being bigger for those who don't want to remove the small tripod
- A small clip that helps prevent the case from slipping off, the use of it might be limited, though, it depends on how it prints on your printer
If you like it, if it fits, if it's useful to you, in short if you are happy with it, you may (though please don't feel obliged to at all) make a symbolic donation
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
150 to 300
Infill:
15-20
Filament: Prusament PLA Any
Notes:
Printing draft (0.3) with my Prusa_MK3 worked fine (1h39 printing time) , but 0.2 or 0.15 for a better finishing is even better (up to 4h30)
Category: Other