Lighted Base for SpaceMonkey3D Liberty Eagle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is only the display base for the Liberty Eagle designed by Space Monkey 3D Designs. Base only!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a lit display stand for Space Monkey 3D Designs Liberty Eagle. This is designed to hold a standard LED puck light commonly found on Amazon https://www.amazon.com/dp/B09M74S2D9?ref=fed_asin_title&th=1
Press the light firmly into the holder and screw into the bottom of the display base.
To purchase the Eagle model shown, visit Space Monkey 3D Designs and join their patreon!
Most parts are printed with 2 walls and 15% infill though this can be changed. I have included a larger base, 193mm diameter, and a smaller base, 174mm diameter for faster printing. The clear lens is only 2 layers thick so settings for clear filaments need to be dialed in close. The clear lens can be glued in if preferred but sits in a cutout.
The top of the display stand features a small indentation of the eagle model to help keep it from sliding around.
This can be printed as multicolor or single color with the lettering separated for those without a MMU/AMS system.
This is for prusaslicer so if you are looking for Bambu .3mf, check it out here
If you like this model, you can buy me a coffee!