Pebble Time 2 Screen bumper/bezel cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick to print edge protector & bezel cover for the raised edge on the pebble time 2 screen
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 255
- Wydruki
- 5
- Wyświetlenia
- 1940
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick to print edge protector for the raised glass edge on the pebble time 2 screen.
This version includes a bezel cover, which gives you more surface to stick the bumper onto your watch. Intended as a friction fit around the screen. A very small amount of double sided tape should keep it in place
Scale the model up or down slightly to get the best fit. Pictures show printed at 100% on a prusa mk3s in grey PETG and red PLA using a 0.6mm nozzle. Printed face down with concentric fill pattern on top and bottom layers
0.4mm and 0.25mm nozzles also work: I have not tried TPU
V1 - Four files are available, two short and two tall, with and without a bevel. Should not interfere with the operation of the touchscreen
V2 - 21 June 2026 - added a fifth file with a smaller bezel (shown in the second picture in red on the red/black watch)