Cyberdeck mounts for NVME Base and mini USB Speaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some mounting frames I made for my Cyberdeck
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
These are some basic mounts I made for the Pimoroni NVME Base and this mini USB Speaker off Amazon.
Recommend printing in heat resistant filament, eg PETG. Once printed, just gluegun the frame where you want it in your Cyberdeck shell, then thread small cable ties through the slots, insert the device and close the ties around it. Only small cable ties will fit through the holes, so you will need to daisy chain them together to reach the required length or make the holes bigger.
Devices are then easily removable by cutting the ties if needed. Make sure you have the clearance you need for connecting USBs, ethernet, etc before gluing.
Have fun!