R36H Internal Button Bracket Protector - Anti-Strain Support (L/R, Power & Volume)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Internal 3D-printed structural protector to prevent damage to L/R, Power, and Volume switches on the R36H.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- GNU General Public License v3.0
Story behind the design:
During the past Children's Day, my students accidentally damaged the top and side buttons of my console. Instead of giving up on the device, I decided to design a permanent hardware solution to reinforce and protect it from future heavy use.
How it works & Installation:
The "Cardboard Mod" Trick: To ensure a perfect fit and mimic the famous Nintendo Switch Joy-Con "drift fix" mod, you need to place a tiny piece of thin cardboard (and glue) between this 3D-printed support and the button mechanism.
Safety First: I engineered this specifically to apply the correct structural counter-pressure without putting dangerous stress on the motherboard (PCB) or the plastic housing.
Future-Proof Design: I left a hollow, open space in the middle of the bracket. This serves for leaving enough room for a future passive cooling mod (like adding copper shims or a small heatsink) to keep temperatures down.
FUTURE: Anti drift for r36s & r36H
Recommended Print Settings:
Material: PLA+ or PETG (for rigidity).
Infill: +30% triangle (it is a tiny structural piece, needs max density).
Supports: No.
Testet with 0.6 nozzle because fast
Files Included:
Full Version: The fully tested, recommended model.
"Smol" Version: A version optimized for smaller 3D printer beds. Please note: This specific version has not been fully tested yet, but in theory, it should work perfectly. If you print it, please leave feedback in the comments!
Log:
V1: Differences from the ideal version: My first design sought to stop the button at a certain height, but since it was too complicated (and I think something that could only be done with a resin printer), I decided it was better to make a bracket that would hold the switch instead of the physical button.
V2: The joystick gets in the way and prevents the console from closing.
V3:I also had problems with the respective R1 button due to a thickness that jammed the button, so the final v3 design eliminated the decoration I had planned for that area.
V.3.1:Oh my god, I had to remove the honeycomb pattern because it was preventing the other side from working.
V4. Happy 🥳