1 / 2
IKEA 365+ 10.6l Filament Storage & Dry Box  - Remake Faster Print — zdjęcie 1
1 / 2

IKEA 365+ 10.6l Filament Storage & Dry Box - Remake Faster Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament dry box mod for IKEA 365+ 10.6l. Solid base replacing hex pattern for cleaner prints and ~50% faster print.

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Modular filament dry box using the IKEA 365+ 10.6l container, fitting 2 spools of 1kg filament. All parts fit on a single MK4 build plate and can be printed at once. Tool-free modular assembly using snap-fit rectangular connectors.

This is a remix of Oestle's original model. The hexagonal pattern on the base plate has been replaced with a solid surface and simple rectangular connectors. The hex pattern caused stringing, blobs on the top surface and longer print times due to excessive travel moves, issues that get even worse on less accurate printers (speaking from experience ; -;). This change results in a cleaner top surface and roughly 50% faster print time.

The only downside is a slight increase in filament usage (less than 1g). Hygrometer mount was left untouched as I didn't need it.