Dive-Xtras Piranha PTB Seal Protector V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seal Protector for Piranha Tube.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The Dive-Xtras Piranha has a modular battery pack (PTB) so you can expand from P1 to P2 or P3 by adding on the module for longer run time. However if you are doing shorter dives where you do not need all the modules, you need a safe way to store your modules so they don't get banged up. I was looking for a simple protector to protect my PTB module that I can bring on my dive trips without having to worry about damaging it.
I created this simple model that will fit around my PTB and protect the unit. I can also fit the Survey Tube. It was not intended to be fancy and it is not waterproof, it is just for general protection. I also wanted to make sure it will print on my MK3S+
I printed in Draft Mode, with 5% infill and initially it seems fine. I used PLA.
I created a solid bottom and ring version so you can choose what you want to use. For the ring type, I use PETG with 15% infill. I used honeycomb infill for sturdiness.
For the ring, I made the vertical little longer to give more side protection.