OpenSCAD Parameterized Honeycomb Storage Wall 90 degree joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little bit of 3D print to fit in the corner between two pieces of the hexagon storage wall
- Ocena
- 5 / 5
- Polubienia
- 282
- Pobrania
- 947
- Wydruki
- 5
- Wyświetlenia
- 7515
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty edges. But I realized I was going to be sticking my honeycomb storage wall in a corner and… maybe I should make a nice corner piece to fit there?
So, here's a corner piece, to fill in the corner section all nice.
Library requirements
This requires you to install the BOSL2 library if you want to customize the gaps to fit whatever you desire but you should be able to use one of the sizes provided if you don't want to deal with that.
Printing settings
I'd suggest you print this with 3 perimeters and the original design was primarily intended to be printed with PETG so I'll just echo that. I'm printing my wall with Atomic Filaments Starry Night Translucent v3 because it's a nice accent color for my walls.
If you like this:
- I have a paramaterized honeycomb storage wall that will fit any size
- I have a paramaterized ruler (or other long rectangular things) holder
- I have a paramaterized feeler gauge (or other stubby rectangular thing) holder
- I have a paramaterized ChipQuik liquid flux organizer
- I have a paramaterized de-soldering sucker holder
- I have a collection of all of the Honeycomb Storage Wall bits I use myself