1 / 5
7Artisans 7.5mm f2.8 fisheye modified lens cap from TPU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens cap for the 7.5mm fisheye with the original lens hood removed for fish eye efect on full frame.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
The 7Artisans 7.5mm fisheye is meant for APS-C, but by unscrewing the front element it is possible to remove the built in lens hood. This makes it a fisheye distored lens for full frame. This lens cap is meant to protect the front element with the lens hood removed, as the original lens cap attaches to the stock lens hood. Does not fit the mark II, only the original version.
This print needs flexible TPU filament. I used eSUN TPU-LW foaming TPU at 250°C for extra softness.