Ecoflow Delta Pro Solar Input Connector Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Broken Ecoflow Delta Pro Solar Connector? well I made a model JUST FOR YOU that puts the connecter back where it belongs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
WARNING, you're handling High Voltage Electronics, I do not recommend operating the fix without standard knowledge of safety practices. only operate while device is unplugged and Off, do not connect anything to the solar as it will automatically turn on if DC power is applied.
Opening this up WILL VOID YOUR WARRENTY. Get it RMA'd while it's still available.
I made a model around Ecoflow Delta Pro with a broken solar connector to affix it back in place without using unhanded glue materials, It requires only 1 m4 screw and 1 m3 screw to affix it in place without movement. it should hold up really well. highly recommended using abs/asa or higher for thermal tolerance.
the top of the Ecoflow can be easily disassembled by removing the gasket on the top to get access to screws.
you can fish out the broken parts if it's lodged, inside the device, safely.
both parts require tapping, one (3m) on the connector side, and the other (4m) on the beam side,
the solar connector should fit snugly along with the cable routes and place the base against the back plastic housing, then slide the interconnect between the housing, where the holes become aligned to fit the m4 screws, lock it in place and put it back together.