1 / 4
Hose to fan adapter (I made for CFS to drier) — zdjęcie 1
1 / 4

Hose to fan adapter (I made for CFS to drier)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

mount a hose to a fan, or in my case, a fan attached to a filament drier

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

hose tube to fan connector. consists of 3 parts.

1. the tube connector, tapered to allow tube to slide on and be taped to it.

2. the interface between the tube connector and the fan base. this is because the fan is larger by a significant amount.

3. the fan base, which is for mounting onto the screw holes in the fan and joins to 2.

the tube parts have reinforcing ribs internally.

I actually printed a model with larger base for the fan, then 3x normal.

In use, I realised I needed all 4 fans I'd bought, so I just attached them without worrying about printing new connectors.

It works, but is slow to bring down moisture and raise temp. That is because my hoses are just old vacuum cleaner hose I chopped up. Shortening and moving them to the same level would be better.

[edit]

I changed my non-fan adapters to the fan type, added the other 3 fans I had (cheap amazon 50mm USB powered fans, completely gutless individually, but combined ok) and it works much better. When first turning on the moisture will climb, then slowly descend to ~25%. Again, shortening the hoses and raising the heater box to a similar level would probably help.

Tagi