Revo 3.3 Conversion ceb 06 Revo - ESC Tray 260111a 6L60F-H-150
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Traxxas Revo 3.3 Converted to 4S. This is the ESC tray. Uses existing holes in Revo Alum Chassis, no drilling required
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Traxxas Revo 3.3 Converted to 4S. This is the ESC tray. Uses existing holes in Revo Alum Chassis, no drilling required.
I used one 4mm machine screw and one 3mm machine screw to attach through existing chassis holes.
The round bosses on the bottom are threaded to accept machine screws from the Top Cap to hold the ESC in. These are spaced for the Cobra8 ESC. I will post the Cobra8 Cap separately.
I printed 6 Layers 60% Fill Gyroid Hilbert Curve Top Surface and 150 mm/s speed .16 layer height PETG-HF