1 / 3
Traxxas Revo 3.3 Conversion ceb 04 Revo - Rear Shock Cover Receiver Tray 3 pcs 6L60F-H-150 251126a — zdjęcie 1
1 / 3

Traxxas Revo 3.3 Conversion ceb 04 Revo - Rear Shock Cover Receiver Tray 3 pcs 6L60F-H-150 251126a

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Tray mounts through the Rear Shock mounts and the rear bulkhead. It is only a tray to hold the Receiver Box.

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

This is the base tray to hold a Receiver box.  It mounts over the rear shocks, but does not interfere with the shocks or suspension.  I do recommend changing the rear shock screws out to a longer screw.  I used  18-8 Stainless Steel Socket Head Screw, M3 x 0.5 mm Thread, 40 mm Long.  they thread right into the existing bulkhead threaded hole.  The rear most screw is  18-8 Stainless Steel Button Head Hex-Drive Screw, M4 x 0.7 mm Thread Size, 15 mm Long, but the slightly shorter stock one would probably be fine.  The other holes in the tray are for the Receiver Box mounting.  Ill post two different styles that will bolt right up.  One is large enough to hold the factory receiver that came with the Revo, the other is sized for my Spektrum SR615.

I printed 6 Layers 60% Fill Gyroid Hilbert Curve Top Surface and 150 mm/s speed .16 layer height PETG-HF

I looked at several conversion prints and drew this one from scratch, with inspiration from many other designs.  If anyone believes this needs to be cited as a remix please let me know and I will add any appropriate references.