Dagger of Death's Flowers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring a piece of Castle Dimitrescu into the real world!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🖨 Printing Instructions & Tips
Material: PLA works perfectly for this model. (Silk Gold/Bronze PLA looks amazing for the hilt!).
Supports: Yes, depending on how you orient the cuts. I recommend printing the hilt vertically with a brim and organic/tree supports for the best detail retention.
Infill: 10–15% is more than enough for a display piece. 3-4 walls/perimeters for strength.
Assembly: (If split) The model is split into parts for easier printing and painting. Use superglue (CA glue) to assemble.
🎨 Post-Processing Tips
For that authentic, ancient look:
Sand the seams after gluing.
Apply a coat of filler primer.
Paint the hilt with gold/bronze acrylics or spray paint, and use a dark wash (diluted black/brown paint) to make the carved details pop.
Paint the blade with a silver/chrome finish and add a touch of "poison" or weathering if desired!
Disclaimer: This is a prop/replica for display and cosplay purposes only. It is not a real weapon.