ZC33S rear-view mirror raise mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shorter mount to raise the height of the rear view mirror. Sourced from https://www.thingiverse.com/thing:7330194
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
I very much liked the original idea but saw there some remnants from the OEM design that weren't needed for a 3D printed version. I also wanted it as an all in one instead of a separate ball join piece as I didn't have the hardware on hand and what I adapted kept coming loose.
All credit to the original designer for the instructions and sharing the scans:
https://www.thingiverse.com/thing:7330194
Additional details and installations notes can be found there.
The fusion design is a bit rough as I edited the original STL as opposed to starting from scratch but there is a parameter there to adjust the ball head size in case none of the existing options work.
I'd suggested printing the ball head from the original model to test the sizes before printing the whole model.
I also updated the wedge slightly to make it reversible to allow bed-side-down surfaces to interface.