1 / 2
Van's Aircraft RV-12 Rudder Pedal Gust Lock — zdjęcie 1
1 / 2

Van's Aircraft RV-12 Rudder Pedal Gust Lock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Rudder Pedal Lock for a Van's Aircraft RV-12. The 3D printed part is a curved "foot" that accepts a 1" (id)…

Ocena
0 / 5
Polubienia
10
Pobrania
54
Wydruki
0
Wyświetlenia
1124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a Rudder Pedal Lock for a Van's Aircraft RV-12. The 3D printed part is a curved "foot" that accepts a 1" (id) Schedule 40 PVC pipe section. The foot goes against the back of the pilot or co-pilot footwell while the PVC pipe goes around the rudder foot pedals. The curve of the printed foot applies tension against the backwall of the footwell when both locks are installed.

The PVC pipe section shown is topped with a 90 deg 1" PVC coupler that has 1/3 of the crossing section cut away to fit around the rudder pedals. Lots of lightening holes were drilled in the PVC using a 1/2" step drill. The overall length and tension are adjusted by changing the pipe length that each end attaches to. Start long and trim for a snug fit.

Print Settings

Printer Brand:

Prusa

Printer: 

Mk2.5s

Notes:

ASA is a good material to print this.

Custom Section

"Foot and PVC pipe assembled

3D printed foot to fit over PVC pipe

 

Category: Sport & Outdoors

Tagi