Zedar ZDR-S600 vacuum cleaner cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement/protective cover for the Zedar ZDR-S600 vacuum cleaner. Optimized for PLA.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Zedar ZDR-S600 Vacuum Cleaner Cover
I designed this cover for the Zedar ZDR-S600 vacuum cleaner as a simple replacement part. I don't know how the Zedar support is, but this took me a morning to design, for like 60 cents of material. And it's more sturdy than the original cover which had weak points.
The uploaded files include:
A Fusion render of the final model to show the intended shape and appearance.
Two screenshots from PrusaSlicer showing the recommended print orientation and support placement (automatically).
The supports shown in the screenshots were generated automatically using the “Supports on build plate only” option and should give good print results.
I also added the gasket which can be printed in TPE/TPU, but it's not perse needed. (You see it in my picture installed with orange TPE).
Recommended print settings:
Material: PLA
Layer height: 0.20 mm
Supports: Supports on build plate only (automatic)
Perimeters: 3
Use the orientation shown in the PrusaSlicer screenshots.
Feel free to adjust settings depending on your printer and filament, but these settings worked well for my print.