1 / 7
Traxxas Revo 3.3 Conversion - ceb 05 Revo - Receiver with AM Style - 1 Latch Tough Box drawn 260128a — zdjęcie 1
1 / 7

Traxxas Revo 3.3 Conversion - ceb 05 Revo - Receiver with AM Style - 1 Latch Tough Box drawn 260128a

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Receiver Boxes for Conversion - F360 drawing has both styles

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Traxxas Revo 3.3 Conversion Receiver Box.  Either of these Receiver Boxes will bolt onto the Tray posted separately.  Big Shout Out to  https://www.printables.com/@chuyskywalker    for the basic design of these boxes.  Tabs for mounting have been added, and a little tweaking on the hinge clearances as well as, some thickening if the Latch Tabs.  TPU straight off the spool can be placed in the seal trough to seal the lid to the base.  Used 1/4" foam to cushion the Receiver.  The bigger one is the Factory Traxxas Revo 2.5R Receiver Box, the smaller one is for my Spektrum SR615.  The Hinge and Latch use 3x30mm machine screws... I used 18-8 Stainless Steel Button Head Hex-Drive Screw, M3 x 0.5 mm Thread Size, 30 mm Long.  Didn't post a .3mf for the Latches but its in the .f3d