Reolink OMVI 3i Angle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled Mount for the Reolink OMVI 3i to adjust its camera more downward and avoid capturing so much sky.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 314
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Reolink OMVI 3i's panoramic camera has a large vertical field of view. Even tilting the panoramic lenses completely downward I still captured a lot of my house's soffit and the distant sky. This adds about an additional 10 degrees of downward angle and did well for my use case. The obj file from Tinkercard is included so you can adjust to the angle you need.
Note that the 360 tracking camera does get angled when turning to view behind the camera after angling the device.
I printed in PETG with 25% for a little extra strength.