Rittal TE7000 Thumb Knob Lock Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple replacement for the original lock for the Rittal TE7000 series
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgrade your Rittal TE7000 cabinet with this thumb knob lock replacement.
This model replaces the original lock mechanism and allows quick and convenient opening and closing using a simple rotary knob.
The design was tested successfully in PETG.
It can be used for both the front and rear cabinet doors.
Bill of Materials (BOM)
Quantity | Part |
|---|---|
1x | M5x9.5 Heat Set Insert |
1x | M5x40 Screw |
Print Settings
Material: PETG or ABS/ASA
Orientation: Print diagonally
Supports: Required
The diagonal print orientation improves strength and overall print quality for the final assembly.
Assembly Instructions
Print all parts diagonally with supports enabled.
Install the M5x9.5 heat set insert into the rotary knob part.
Join the diagonal split section using super glue (cyanoacrylate).
Assemble the parts using the M5x40 screw.
Install the finished mechanism into the cabinet door.
Notes
Designed and tested in PETG.
The mechanism operates smoothly and reliably in daily use.
Suitable for both front and rear TE7000 cabinet doors.