Hose Union (Male-to-Male) unthreaded
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect two 1 1/4" sump pump hoses.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a sump pump that I use to drain old nasty water out of the horse's drinking barrel. I bought 2 discharge hoses (1 1/4") and I needed a coupling to stick them together to reach a good drainage site. I was unable to find what I wanted (surprised nobody seems to make/sell this union) so I designed one.
I made it out of ABS as it needs to live outside in the sun and heat of the horse area. It didn't need to be 100% water tight, but I wanted a solid push fit so the hoses wouldn't come apart when in use but able to disconnect them for storage.
(Note: The fillet at the hex-to-ring is to prevent the need for support.)
(Sorry everything looks dirty in the pictures; it has been in use for a while.)
Print Settings
no support
0.20mm
20% infill
4 perimeters for strength
2mm brim to keep the tall thin ring stuck to the bed
ABS for outdoor use