1 / 6
Traxxas Revo 3.3 Conversion - ceb 03 Revo - Trans Gear  Both End Hubs Transmission Second Gear Lockup - Forward Only — zdjęcie 1
1 / 6

Traxxas Revo 3.3 Conversion - ceb 03 Revo - Trans Gear Both End Hubs Transmission Second Gear Lockup - Forward Only

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Revo 3.3 First gear removal and forward only needed for 4S conversion from Nitro

Ocena
0 / 5
Polubienia
6
Pobrania
35
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

Traxxas Revo 3.3 Conversion from Nitro to 4S  - Two speed Nitro Revo 3.3 Transmission conversion to Forward Only (Reverse is now done with electric, as is Braking).  The Two speed trans is also converted to Second Gear Only (Second Gear Lockup).  The Forward Only part is best done with Traxxas Fwd Only kit 5394X.  The two Hub Ends posted here does the Second Gear Lockup part using the Traxxas kit.  The two End Hubs 'sandwich' Second Gear and the new intermediate gear (supplied with kit) to form a rock solid Locked Up Second Gear drive

Both Hubs printed at .16 Layer Height, 8 Layers,  80% Fill,  and Hilbert Curve top layer. 

Print one small OD hub and two large OD hubs

The Larger OD Hub has 6 threaded holes for the through bolts.  These 3mm holes will have to be drilled through the factory Second gear (larger of the white ones).  Put everything together and drill from the small hub right on through the large OD hub using it as a guide.  After all 6 holes are drilled throw the 'guide' hub away and use the other large OD hub for final assembly

Used:

6 pcs   18-8 Stainless Steel Socket Head Screw, M3 x 0.5 mm Thread, 35 mm Long

3 pcs   18-8 Stainless Steel Hex-Drive Flat Head Screw, M4 x 0.7 mm Thread Size, 14 mm Long