Case for Wahoo ELEMNT ROAM V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for Wahoo ELEMNT ROAM V3. Printed with TPU
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this simple case for my Wahoo ELEMNT Roam V3 to protect it a little bit. The buttons are not covered but it should provide at least some protection :)
I printed it in TPU 95A, but depending on the printer a softer Material might be even better. The model can be printed without supports, but even when using supports they can easily removed with some side cutters. I printed it laying flat on the bottom rim.
It might be a little finicky getting the device into the case but i had phone cases that were harder to put on and remove, so it should be fine :)