1 / 29

PVS D.A.R.T. 1 (Direct Action Reconnaissance Thermal) 50fps, 640x512, 1:1 monocular

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

LWC

@LupusWorax

Pretty much one of the smallest DIY fully featured 1:1 helmet mountable thermal monocular out there.

Ocena: 5 / 5
Polubienia: 56
Pobrania: 352
Wydruki: 0
Wyświetlenia: 2554
Oceny: 1

Aktualizacja u źródła: 3 paź 2026

Informacje o modelu

Źródło: Printables
Kategoria: Electronics
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 11)Remiksy (0)Kolekcje (51)

UPFRONT:

C6 Core was just released and the link updated! listing is still in screening process and should be accessible from 20.06.26!

Core arrived and its a worthy sucessor to the P6 providing an even better less grainy picture with high contrasts between objects! Very recommended!!!

~~Functionallity and performance is NOT YET tested and confirmed by me! If you order right away you do so on your own behalf!~~

like just one day after I released the D.A.R.T I got intel that the P6 13mm thermal core is phased out...........worst timing ever, so all you guys who were still able to get a P6 from the link are lucky.

~~Its so weird as the P6 is probably 4-5 month old, just as we figured everything out its gone :(~~

~~But dont throw your prints away just yet, the P6 core is gone but will be replaced by the C6.~~

In theory it should be better but as long as I dont have one in my hand to confirm it is a suitable replacement for the P6 I wont confirm this. This SUCKS big time, like the timing could not have been worse. Once I get my Hand on a C6 I will have to adapt the firmware, footprint is pretty much the same, it is even 3-4 mm shorter which would help quite a bit with wiring.

~~What should I say other then " It is what it is!"~~

I will keep you updated, join my Discord to be at the pulse of time with updates and news.

____________________________________________________________________________________________________________

The D.A.R.T 1 is a super compact fully featured helmet mountable 640x512 resolution thermal monocular with 1:1 perception. Powered by a 18350 1600mAh swap able Lithium Ion battery.

For this build to work your printer must be properly calibrated in case your prints come off the print bed smaller as they should, consider scalling all parts up to 100.5 or 101% if needed!

Join the PVS420 Discord where you can find the ongoing development of the Dart1 micro core Including build updates/ status and much more.

https://discord.gg/Ce9BJ2DK3j

Parts list:

The following camera link is an affiliate link. It won’t cost you anything extra, but they help support the project and its ongoing development. This allows me to recover a small portion of the costs while continuing to offer everything for free.

C6 50fps 640 thermal core: 13mm. !!!When you order add note: adjustable focus and NOT glued!!!

https://s.click.aliexpress.com/e/_c31Lnygh

Brass disk for screw cap battery compartment: (20x0.5mm)

https://de.aliexpress.com/item/1005009999538352.html

NP18 18x Lens: The WHOLE lens and NOT just the core!!

NP18 Digitales Nachtsichtgerät, Wärmebildgerät, Fernglas, breites Sichtfeld, 18 x 0,39–0,5 Bildschirm mit Schutzabdeckung - AliExpress 502

Voltage booster: de solder small button on board!

https://de.aliexpress.com/item/1005007953322381.html

Main Power switch:

https://de.aliexpress.com/item/1005009931587839.html

0,39" Display: with AV 3Color

https://de.aliexpress.com/item/1005008087046449.html