Shrew W2 (Sora v2 Fingertip mouse)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This uses the Ninjutso Sora v2 PCB in a lightweight fingertip shape shell. It DOES NOT contain side buttons.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mouse is 15 grams using a 50 mAh battery with a magnetic USB C adapter, and printed in ABS and without the side buttons. Using the stock battery, it is about 19 grams. If using the stock battery, it can be mounted at an angle leaning on the mouse button arms and the sensor.
To attach the mouse buttons, you simply place them into the slots and then use a soldering iron or similar tool to gently weld them in place. I have not used superglue, but I imagine it is possible to glue them instead.
Print in any material you like. I printed mine in ABS since it is a bit less dense than PLA, however PLA will work just fine. All models are recommended to be printed on the largest FLAT surface, and with tree supports on only horizontal bridges. You may need to use manual supports in order to not cover the honeycomb in supports.