Waschbecken Stöpsel / Sink Stopper Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D-printed stabilizer for loose sink stoppers. Prevents wobbling and improves pop-up alignment.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Sink Stopper Stabilizer
Many replacement sink stoppers are slightly too small for older washbasins.
They may still seal the drain, but the lower section can wobble inside the drain pipe, causing alignment issues with the lift rod or pop-up mechanism. In some cases, the stopper can even get stuck because the mechanism no longer engages properly.
This 3D-printed stabilizer solves the problem by centering and guiding the sink stopper inside the drain opening. It reduces wobbling, improves alignment, and helps the lift mechanism reliably catch and release the stopper again.
Features
Stabilizes loose or undersized sink stoppers
Prevents wobbling inside the drain pipe
Improves alignment with the lift rod / pop-up mechanism
Simple drop-in installation
Compact and easy to print
Ideal for repairing older sinks without replacing the entire drain assembly
Compatibility
Designed for standard bathroom sink stoppers with a smaller lower shaft diameter.
Depending on your sink model, scaling may be required for the perfect fit.
Printing Recommendations
Material: PETG or PLA
Layer height: 0.2 mm
No supports required
3 perimeters recommended for durability
A simple fix for an annoying everyday problem.