1 / 5
Phone stand with disconnecting holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone stand with disconnecting holder to make holding your phone at awkward angles easier.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since in this version only the stand is back-compatible it has been uploaded as a remix.
An M4 screw 10mm in length is used to secure the handle to the base of the holder, with a thin washer between the screw and the handle, and an elastic band is used as a spring for the sliding arms.
the stand holds the holder holding the phone at a 15° angle.
.STEP for the slide included.
This version has notable improvements over the previous versions like:
- Improvements to durability due to increased slide thickness
- Longer effective span it can extend outward
- Still lower material usage then version 2
- Improved tolerances between the base and slide to reduce twisting motion
- Max recommended device width 94mm
- Max device thickness 15mm
Printed Tested With
- Printbed brand PLA, colors White & Peanut Butter
- 0.4mm E3D Nozzle
- @ 0.15mm layer height