1 / 2
Pretensioned clip / Klammer mit Vorspannung — zdjęcie 1
1 / 2

Pretensioned clip / Klammer mit Vorspannung

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This clamp exerts force even when closed

Ocena
5 / 5
Polubienia
156
Pobrania
519
Wydruki
2
Wyświetlenia
1708
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I needed a clamp that exerts force even when there's little material between the jaws, or that has more force than other clamps. So I designed a clamp with separate jaws that gains preload through the thick jaws. Additionally, it looks quite nice when you use different colors.
For outdoor use, PETG or even better ASA should be used. The print should be done entirely with perimeters or at least with 100% infill. The clearance of the dovetail joints is 0.15 mm. Depending on the filament used or printer, this may be too tight or too loose. If necessary, the size of the jaws can be adjusted in the slicer or adhesive can be used.

Tagi