Filament Cutter 45° - No more pinching
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small modification to Pomi's filament cutter making the plunger longer, so it no longer easily pinches skin during use.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 2
- Wyświetlenia
- 191
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The original Filament Cutter by Pomi generally works great, except its tendency to easily pinch the skin of the hand/finger between the plunger and the main body of the cutter. This is a very simple modification to help prevent that from happening.
I have simply extended the "Top" part by 4mm, so the gap between the plunger and body cannot get smaller than 4mm when the mechanism bottoms out during a cut. With the original the gap would completely close up very suddenly and with quite a bit of force when the blade cuts the filament.
In all other ways it works the same as the original. It prints the same and uses the same length of screws.
Download the Body part from the original and follow the instructions listed:
More: