Mosasaurus Tooth (3D Scan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A high detail model of a Mosasaurus tooth that I scanned and processed with RealityScan
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution
This is a photogrammetry scan that I did of a Mosasaurus tooth.
This is a super wasy For best results, follow these print settings:
The footprint is smaller than preferred, so have either a raft or a brim to prevent the print from falling over
Print with a much smaller layer height. I did 0.08mm.
If you do not feel confident with printing without supports, you can paint tree supports around the base, or, alternatively, orient the model this way:
Mosasaurus Fun Facts:
Source: https://en.wikipedia.org/wiki/Mosasaurus#/media/File:Mosasaurus_hoffmannii_-_skeleton.jpg
The name means, "Lizard of the Meuse River"
The first Mosasaurus fossil was discovered in the mid 1700s
The largest specimens were thought to grow as large as 39ft (12m)
Mosasaurus likely preyed on shark, turtles, bony fish, birds, cephalopods, and marine reptiles
