1/3rd Scale Soundmaster 115 (EARLY ACCESS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Functional 1/3rd scale Soundmaster 115 siren. This is work in progress so things are subject to change!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my 1/3rd Soundmaster 115 siren. It is VERY loud! This is also early access and some stuff is not tested/made. I do intend on making the dual tone and 3 signal variants but those will come with time in later updates. This also goes for the junction box and official mounting.
NOTE: THIS MODEL IS STRICTLY FOR 3D PRINTING. DO NOT PUT THIS MODEL IN ANY VIDEO GAMES LIKE ROBLOX!
Minimum print bed size 220x220x250 (same size as a stock ender 3 printer)
MOTOR:
This model uses a Samsung microwave blower motor. DE31-00029H, DE31-00029K, and DE31-00029J are the best options. The best deals for motors are found on eBay for around 30-40 dollars.
For the Capacitor, 8uF or 10uF is best suited for this siren.
Cable I use/recommend:
https://www.amazon.com/dp/B0BSBSKQTM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Capacitor (10uf)
https://www.amazon.com/uxcell-Capacitor-Metallized-Polypropylene-47x34x18mm/dp/B0983L1731?crid=2NDS0RFZZIYQI&dib
Capacitor (8uf)
https://www.amazon.com/dp/B0143VJN40?ref=ppx_yo2ov_dt_b_fed_asin_title
Weights (18 needed)
https://www.amazon.com/dp/B0D2Q2QW43
Video of the original build before it died
HARDWARE:
Eyebolts:
https://www.amazon.com/dp/B0FHD5WGS2 Buy X2 M3x8 specifically
M3 screws and inserts are needed for all parts.
DO NOT FORGET, use glue on the weights! If you do not you are at risk of them FLYING OUT which can cause injury if not careful.