Charlie Chaplin Bust | PrusaSlicer ColorMix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylized Charlie Chaplin bust generated with AI and hand-painted using the new ColorMix feature in PrusaSlicer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This project is a stylized bust of Charlie Chaplin prepared for multicolor printing using the new ColorMix workflow available in PrusaSlicer.
The original geometry was generated with AI tools and later optimized for 3D printing. The final appearance was achieved by manually painting the model with the ColorMix painting tools inside PrusaSlicer to create smooth color transitions and a more artistic finish.
The model was printed as a decorative display piece focused on experimenting with multicolor surface shading rather than using traditional filament swaps.
Printing notes
Recommended nozzle: 0.4 mm
Layer height: 0.15–0.20 mm
Supports: Model has painted support, organic prefered
Best results with well-calibrated multicolor setup
Use only PLA colors Black and White, grey tones were possible using ColorMix
Scale up to any size you like :)