Mini air stripper for FX Impact (or other ½ UNF)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better accuracy with an air stripper (really an air diffuser) for airguns. Suitable size for use with a barrel harmonic.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Pellets can experience air turbulence in the muzzle during propulsion, negatively impacting shot accuracy. You can improve accuracy by using an air diffuser for airguns, allowing the pellet to be propelled by laminar flow and eliminating some of the turbulence.
I've conducted tests with different sizes of this stripper (this is the mini version) with selected pellets in my FX Impact and noticed an improvement in accuracy of up to approximately 20% with 60mm of felt. The tests aren't exhaustive, but it seems to have a positive effect on accuracy. I'm tempted to print the case in TPU to evaluate if there are any changes; if anyone does this, I would appreciate it if you could let me know the result.
This design, Suitable size for use with a barrel harmonic tuner, utilizes the Felt print feature with a 50% infill density. The part labeled "Felt Case" should be printed with the following settings on the Orca slider: Infill pattern spacing: Gyroid, Wall loop = 0, and Top shell layer = 0. You must join the Felt Case with the Threaded Joint with a cyanoacrylate adhesive.
Printed with PLA, Threaded Joint for Fx Impact. The diffuser is designed with the same diameter as the Fx Impact M4 barrel (28mm).